翻訳と辞書
Words near each other
・ Ordishia godmani
・ Ordishia klagesi
・ Ordishia rutilus
・ Ordish–Lefeuvre system
・ Ordizan
・ Ordizia
・ Ordizia KE
・ Ordizia RE
・ Ordlegan
・ Ordmin
・ Ordnance
・ Ordnance Annex
・ Ordnance BL 12 pounder 7 cwt
・ Ordnance BL 12-pounder 6 cwt
・ Ordnance BL 15 pounder
Ordnance BLC 15-pounder
・ Ordnance Clothing Factory
・ Ordnance Clothing Factory, Shahjahanpur
・ Ordnance Corps
・ Ordnance Corps (Ireland)
・ Ordnance Corps (Israel)
・ Ordnance Corps (United States Army)
・ Ordnance datum
・ Ordnance Depot
・ Ordnance Factories Board
・ Ordnance Factory Itarsi
・ Ordnance Factory Medak
・ Ordnance Factory Muradnagar
・ Ordnance Factory Tiruchirappalli
・ Ordnance Island


Dictionary Lists
翻訳と辞書 辞書検索 [ 開発暫定版 ]
スポンサード リンク

Ordnance BLC 15-pounder : ウィキペディア英語版
Ordnance BLC 15-pounder

The Ordnance BLC 15 pounder gun (BLC stood for BL Converted) was a modernised version of the obsolete BL 15 pounder 7 cwt gun, incorporating a recoil and recuperator mechanism above the barrel and modified quicker-opening breech. It was developed to provide Territorial Force artillery brigades with a reasonably modern field gun without incurring the expense of equipping them with the modern 18 pounder. It is the gun which writers usually mean by "15 pounder gun" in World War I, but can be confused with the earlier Ordnance QF 15 pounder which fired the same shell.
==History==
Many modifications were made to the old 15 pounder barrels to adapt them to a new carriage with a recoil buffer and recuperator above the barrel similar to the modern 13 pounder design. Previously the barrels had been mounted directly on the carriage by trunnions. Now the barrel was suspended from a forged-steel inverted U-shaped cradle which had trunnions to attach it to the carriage. The trunnions, sight brackets and elevating gear attachment lugs were removed from the barrel. The radial T-vent hole on top was plugged, holes in the jacket passing through the trunnion centres were sealed with screwed steel plugs, and the holes in the hood for fitting tangent sights were plugged with white metal alloy.
The 3-motion breech was replaced by a single-motion interrupted screw breech which had an axial T vent running through it into the chamber, designed to take a T friction tube.
The new firing mechanism involved a new which was inserted into the axial breech vent. The crosspiece of the T was positioned pointing upwards. A long layer's guard was added to the left side of the cradle projecting behind the breech. A spring-loaded firing handle was built into the layer's guard. When cocked by pulling back and then released, it sprang forward and struck a firing lever on the breech, which translated the forward motion to a downward motion and propelled a firing plunger into the T of the friction tube which in turn ignited the cordite propellant charge.
In 1915, Territorial batteries guarding the east coast of England adapted their 15 pounders for use against Zeppelins, by simply digging a pit to accommodate the trail of the gun, to allow it to be trained upwards. It is unlikely that this arrangement was ever used operationally.〔J D Sainsbury, The hertfordshire Batteries of the Royal Field Artillery, Hart Books, Welwyn, 1996 ISBN 978-0-948527-04-3 (p.43)〕 In a more sophisticated adaptation, two 15 pounders were modified for anti-aircraft use by increasing allowed elevation to more than 60°.〔 These guns were installed at Ford Wynyard in Cape Town.

抄文引用元・出典: フリー百科事典『 ウィキペディア(Wikipedia)
ウィキペディアで「Ordnance BLC 15-pounder」の詳細全文を読む



スポンサード リンク
翻訳と辞書 : 翻訳のためのインターネットリソース

Copyright(C) kotoba.ne.jp 1997-2016. All Rights Reserved.